Effects of total contact insoles on the plantar stress redistribution: a finite element analysis


      Objective. To investigate the effects of total contact insoles on the plantar stress redistribution using three-dimensional finite element analysis.
      Design. The efficacies of stress reduction and redistribution of two total contact insoles with different material combinations were compared with those of a regular flat insole used as a baseline condition.
      Background. Many specially designed total contact insoles are currently used to reduce the high plantar pressure in diabetic patients. However, the design of total contact insoles is mostly empirical and little scientific evidence is available to provide a guideline for persons who prescribe such insoles.
      Methods. To use three-dimensional finite element models of the foot together with insoles to investigate the effects of total contact insoles on the foot plantar pressure redistributions. Nonlinear foam material properties for the different insole materials and the contact behavior in the foot–insole interface were considered in the finite element analysis.
      Results. Results showed that the peak and the average normal stresses were reduced in most of the plantar regions except the midfoot and the hallux region when total contact insoles were worn compared with that of the flat insole condition. The reduction ratios of the peak normal stress ranged from 19.8% to 56.8%.
      Conclusions. Finite element analysis results showed that the two sets of total contact insoles used in the current study can both reduce high pressures at regions such as heel and metatarsal heads and can redistribute the pressure to the midfoot region when compared with the flat insole condition.Relevance
      It is possible to simulate foot deformities, change in material properties, different ambulatory loading conditions, and different orthotic conditions by altering the finite element model in a relatively easy manner and these may be of interests to the medical professionals who treat foot-related problems.


      To read this article in full you will need to make a payment

      Purchase one-time access:

      Academic & Personal: 24 hour online accessCorporate R&D Professionals: 24 hour online access
      One-time access price info
      • For academic or personal research use, select 'Academic and Personal'
      • For corporate R&D use, select 'Corporate R&D Professionals'


      Subscribe to Clinical Biomechanics
      Already a print subscriber? Claim online access
      Already an online subscriber? Sign in
      Institutional Access: Sign in to ScienceDirect


        • Alexander I.J.
        • Chao E.Y.S.
        • Johnson K.A.
        The assessment of dynamic foot-to-ground contact forces and plantar pressure distribution: a review of the evolution of current techniques and clinical applications.
        Foot Ankle Int. 1990; 11: 152-167
        • Boulton A.J.M.
        • Franks C.I.
        • Betts R.P.
        • Duckworth T.
        • Ward J.D.
        Reduction of abnormal foot pressures in diabetic neuropathy using a newpolymer insole material.
        Diabetes Care. 1984; 7: 42-46
        • Boulton A.J.M.
        • Hardisty C.A.
        • Betts R.P.
        • Franks C.I.
        • Worth R.C.
        • Ward J.D.
        • et al.
        Dynamic foot pressure and other studies as diagnostic and management aids in diabetic neuropathy.
        Diabetes Care. 1983; 6: 26-33
        • Brown M.
        • Rudicel S.
        • Esquenazi A.
        Measurement of dynamic pressures at the shoe–foot interface during normal walking with various foot orthoses using the FSCAN system.
        Foot Ankle Int. 1996; 17: 152-156
        • Caputo G.M.
        • Cavanagh P.R.
        • Ulbrecht J.S.
        • Gibbons G.W.
        • Karchmer A.W.
        Assessment and management of foot disease in patients with diabetes.
        New Engl. J. Med. 1994; 331: 854-860
        • Cavanagh P.R.
        • Ulbrecht J.S.
        • Caputo G.M.
        Biomechanical aspects of diabetic foot disease: aetiology, treatment, and prevention.
        Diabetic Med. 1996; 13: S17-S22
        • Chen W.P.
        • Tang F.T.
        • Ju C.W.
        Stress distribution of the foot during mid-stance to push-off in barefoot gait: a 3-D finite element analysis.
        Clin. Biomech. 2001; 16: 614-620
        • Chu T.M.
        • Reddy N.P.
        • Padovan J.
        Three-dimensional finite element stress analysis of the polypropylene, ankle-foot orthosis: static analysis.
        Med. Eng. Phys. 1995; 5: 372-379
        • Cobb J.
        • Claremont D.J.
        Transducers for foot pressure measurement: survey of recent developments.
        Med. Biol. Eng. Comput. 1995; 33: 525-532
        • Donaghue V.M.
        • Sarnow M.R.
        • Giurini J.M.
        • Chrzan J.S.
        • Habershaw G.M.
        • Veves A.
        Longitudinal in-shoe foot pressure relief achieved by specially designed footwear in high risk diabetic patients.
        Diabetes Res. Clin. Pr. 1996; 31: 109-114
        • Hosein R.
        • Lord M.
        A study of in-shoe plantar shear in normals.
        Clin. Biomech. 2000; 15: 46-53
        • Jacob S.
        • Patil K.M.
        • Braak L.H.
        • Huson A.
        Stresses in a 3D two arch model of a normal human foot.
        Mech. Res. Commun. 1996; 23: 387-393
        • Kato H.
        • Takada T.
        • Kawamura T.
        • Hotta N.
        • Torii S.
        The reduction and redistribution of plantar pressures using foot orthoses in diabetic patients.
        Diabetes Res. Clin. Pr. 1996; 31: 115-118
        • Lavery L.A.
        • Lavery D.C.
        • Vela S.A.
        • Quebedeaux T.L.
        Reducing dynamic foot pressures in high-risk diabetic subjects with foot ulcerations.
        Diabetes Care. 1996; 19: 818-821
        • Lemmon D.
        • Shiang T.Y.
        • Hashmi A.
        • Ulbrecht J.S.
        • Cavanagh P.R.
        The effect of insoles in therapeutic footwear––a finite element approach.
        J. Biomech. 1997; 30: 615-620
        • Lord M.
        • Hosein R.
        Pressure redistribution by molded inserts in diabetic footwear: A pilot study.
        J. Rehab. Res. Dev. 1994; 31: 214-221
        • Lord M.
        • Hosein R.
        • Williams R.B.
        Method for in-shoe shear stress measurement.
        J. Biomed. Eng. 1992; 14: 181-186
      1. marc Volume A: Theory and User Information, Version K7, marc Analysis Research Corp., Palo Alto, CA, USA, 1997

        • Reiber G.E.
        • Smith D.G.
        • Boone D.A.
        • del Aguila M.
        • Borchers R.E.
        • Mathews D.
        • et al.
        Design and pilot testing of the DVA/Seattle footwear system for diabetic patients with foot insensitivity.
        J. Rehab. Res. Dev. 1997; 34: 1-8
        • Rozema A.
        • Ulbrecht J.S.
        • Pammer S.E.
        • Cavanagh P.R.
        In-shoe plantar pressures during activities of daily living: implications for therapeutic footwear design.
        Foot Ankle Int. 1996; 17: 352-359
        • Yettram A.L.
        • Camilleri N.N.
        The forces acting on the human calcaneus.
        J. Biomed. Eng. 1993; 15: 46-50
        • Zhu H.
        • Wertsch J.J.
        • Harris G.F.
        • Loftsgaarden J.D.
        • Price M.B.
        Foot pressure distribution during walking and shuffling.
        Arch. Phys. Med. Rehab. 1991; 72: 390-397