« Previous
Next »
Clinical Biomechanics
Volume 16, Issue 5
, Pages 373-379
, June 2001
Tomodensitometry measurements for in vivo quantification of mechanical properties of scoliotic vertebrae
References
- . The fundamentals of computer aided X-ray analysis of the spine. J. Biomech. 1974;7:161–169
- . Spinal analysis using a three-dimensional radiographic technique. J. Biomech. 1976;9:355–365
- . A radiographic method for three-dimensional analysis of spinal configuration. Radiology. 1980;137:343–348
- . Optimized vertical stereo base radiographic setup for the clinical 3D reconstruction of the human spine. J. Biomech. 1994;27:1023–1035
- . Analysis of changes in the scoliotic spine using a three-dimensional radiographic technique. J. Biomech. 1980;13:279–290
- . Quantitation of three-dimensional deformity of idiopathic scoliosis. Spine. 1992;17(3S):22–29
- . Axial rotation measurement of scoliotic vertebrae by means of computed tomography scans. Spine. 1996;21(5):576–581
- . Analyse infographique des déformations tridimensionnelles des vertèbres scoliotiques. Annales de Chirurgie. 1997;51(58):868–874
-
Périé D. Evaluation biomécanique par la Méthode des Eléments Finis de l'effet du corset Cheneau-Toulouse-Munster sur une colonne vertébrale scoliotique par Imagerie par Résonance Magnétique. PhD dissertation, Université Paul Sabatier, Toulouse, France; 1999
- . Precise measurement of vertebral mineral content using computed tomography. J. Comput. Assist. Tomogr. 1980;4(4):493–500
-
.
Prediction of vertebral body compressive fracture using quantitative computed tomography.
J. Bone. Joint Surg. 1985;67A(8):1206–1214
- . Radiology. 1987;164(2):419–423
- . Correlation between breaking load and CT absorption values of vertebral bodies. Eur. J. Radiol. 1982;2:99–101
-
.
Correlation of mechanical properties of vertebral trabecular bone with equivalent mineral density as measured by computed tomography.
J. Bone. Joint Surg. 1988;70A(10):1531–1538
- . Stress distribution and bone density in the lumbar spine. Chin. Med. Sci. J. 1992;7(2):105–107
- . Relation of mechanical properties to density and CT numbers in human bone. Med. Eng. Phys. 1995;17(5):347–355
-
Hobatho MC, Rho JY, Ashman RB, Mechanical properties of the lumbar spine. In: Sevastik J, editor. Research into spinal deformities, vol. 1. Stockholm: IOS Press; 1997. p. 181–84
-
Périé D, Hobatho MC, Sales de Gauzy J, Sévely A, Montéan A. 3D geometrical analysis of the CTM effect on scoliotic patient. In: Stokes IAF, editor. Research into spinal deformities, vol. 2. Burlington: IOS Press; 1999. p. 158–61
- . Quantitative computed tomography for bone mineral measurement: technical aspects, dosimetry, normal data and clinical applications. Br. J. Radiol. 1991;64:298–304
PII: S0268-0033(01)00010-9
© 2001 Elsevier Science Ltd. All rights reserved.
« Previous
Next »
Clinical Biomechanics
Volume 16, Issue 5
, Pages 373-379
, June 2001
